NEWS
NEW PRODUCTS
D-Torch for Agilent (Varian) 700-ES/Vista Axial
and PerkinElmer Optima 8x00 DV
The D-Torch is a new demountable torch design that provides the
benefits of a fully demountable torch at a significantly lower cost.
We have previously released the D-Torch for several ICP-OES and
ICP-MS models. D-Torches are now available for the Agilent (Varian)
700-ES/Vista Axial and PerkinElmer Optima 8000/8300 DV models.
The D-Torch is a cost-effective alternative to the standard fixed
torch or semi-demountable torch. It will save money for any
laboratory with a moderate workload. In most cases, when the
torch wears, you will only need to replace the outer tube instead of
replacing the entire torch. You will realize a saving after replacing
the outer tube three to five times. In addition, interchangeable
quartz and alumina injectors are available for the 700-ES/Vista
torch. The Optima 8000/8300 D-Torch is compatible with the full
range of standard injectors.
The optional ceramic outer tube is much more robust than quartz
and provides extended torch life, particularly with samples that
cause rapid deterioration of a quartz torch, such as fusions, high
salt solutions or oils.
Part No. Description
30-808-2919 D-Torch for 700-ES or Vista Axial
31-808-3027 Ceramic Outer Tube for 700-ES/Vista Axial
D-Torch
31-808-3043 Tapered Quartz Injector 2.4mm for 700-ES/Vista
Axial D-Torch
31-808-3133 Tapered Alumina Injector 2.4mm for 700-ES/Vista
Axial D-Torch
30-808-3300 D-Torch for Optima 8000/8300 DV
31-808-2990 Ceramic Outer Tube for Optima 8000/8300 DV
D-Torch
Click here to see the full D-Torch range.
ConeGuard Thread Protector for Thermo
Micro-Skimmer
We recently released ConeGuards for a range of ICP-MS cones.
The range has now been extended to include the Thermo micro-skimmer
cone.
Thermo X Series and PlasmaQuad
ConeGuard Thread
Cone
Protector Part No.
Part No.
OEM Cone
Part No.
Cone
Description
70-803-1028
TG1004-Ni 3200860 Nickel
Micro-Skimmer
TG1004-Al 3201101 Aluminium
Micro-Skimmer
TG1008-Pt Platinum
Micro-Skimmer
When cleaning cones which have a screw thread, it is important
that the thread is not contacted by any corrosive solution. If the
thread gets corroded, the cone may not seal correctly or it may
bond to the base and be difficult to remove. And with Pt cones,
the thread is likely to wear out before the Pt insert. The Glass
Expansion ConeGuard Thread Protector seals the thread and
protects it from corrosion during the cleaning process.
Click here to see the full ConeGuard range.
HF Resistant Niagara Plus and Assist Kits
The Niagara Plus is well established as the most effective way
to reduce analysis time, increase sample throughput and reduce
operating costs. And the Assist syringe-driven sample introduction
system improves accuracy and precision as well as reducing the
analysis time. Both of these systems use a positive displacement
pump to rapidly fill a sample loop. The only disadvantage of this
system is that the pump is not compatible with hydrofluoric acid
(HF). To overcome this problem, we have now released new
Niagara Plus and Assist systems that use a syringe drive in place
of the positive displacement pump. Since no sample comes in
contact with the syringe, these systems are compatible with all
ICP samples, including those containing HF. The ordering details
are as follows:
Part No. Description
KT-1110 Niagara Plus for HF with uptake syringe
KT-1111 Assist Basic Package for HF with uptake syringe
KT-1112 Assist Premium Package for HF with uptake
syringe
D-Torch for 700-ES or Vista Axial
D-Torch for Optima 8000/8300 DV
www.geicp.com Glass Expansion Newsletter | Issue 29 | page 5
/wrapper.pl?c1=Showpart&partno=KT-1110
/wrapper.pl?c1=Products_torches_dtorch
/wrapper.pl?c1=Showpart&partno=30-808-2919
/wrapper.pl?c1=Showpart&partno=31-808-3027
/wrapper.pl?c1=Showpart&partno=31-808-3043
/wrapper.pl?c1=Showpart&partno=31-808-3133
/wrapper.pl?c1=Showpart&partno=30-808-3300
/wrapper.pl?c1=Showpart&partno=31-808-2990
/www.geicp.com
/wrapper.pl?c1=Showpart&partno=KT-1111
/wrapper.pl?c1=Showpart&partno=KT-1112
/wrapper.pl?c1=Products_cones_ConeGuard
/wrapper.pl?c1=Showpart&partno=70-803-1028
/wrapper.pl?c1=Showpart&partno=TG1004-Ni
/wrapper.pl?c1=Showpart&partno=TG1004-Al
/wrapper.pl?c1=Showpart&partno=TG1008-Pt
/www.geicp.com
