NEW Products for Analytik Jena® PlasmaQuant 9000 Series ICP-OES

Glass Expansion offers a complete range of nebulizers, spray chambers, torches, and other accessories for the Analytik Jena® PlasmaQuant 9000 Series. Our high performance sample introduction components will reduce your instrument running costs, enhance its performance and improve usability.

Nebulizers

All Glass Expansion concentric glass nebulizers (Figure 1a.) feature our unique VitriCone™ capillary construction delivering you the best possible manufacturing precision. Glass Expansion is the only manufacturer that takes thick walled constant-bore tubing and machines the outside to a uniform aerodynamic shape. This guarantees a uniform sample channel, assuring tolerance to high matrix samples and perfect reproducibility.

Samples with residual hydrofluoric acid (HF) require an inert nebulizer such as the DuraMist nebulizer (Figure 1b.) or VeeSpray ceramic nebulizer (Figure 1c.). DuraMist is a concentric nebulizer made of PEEK. It is ideally suited to ICP-OES for high sensitivity and excellent short-term precision with the highest tolerance to dissolved salts of any concentric nebulizer. The VeeSpray nebulizer is made of high purity Alumina grade ceramic. This parallel path nebulizer is virtually unblockable and provides the best tolerance to large particulates and abrasion-resistance.

All the above nebulizers come with our inert, metal-free DC (Direct Connection) gas fittings as standard.

Figure 1. Glass Expansion Nebulizers

Ordering Information

Part Number	Description
A13-07-USS2	SeaSpray DC Nebulizer 2mL/min
A13-05-UM04	MicroMist DC Nebulizer 0.4mL/min
A13-05-UC1	Conikal DC Nebulizer 2mL/min
A13-07-US6	Slurry DC Nebulizer 4mL/min
A13-05-DM1	DuraMist DC Nebulizer 1mL/min
A13-07-CV6	VeeSpray Ceramic DC Nebulizer

---

Spray Chambers

The spray chamber is a crucial component of the ICP sample introduction system since it has a profound effect on transport efficiency, precision, and washout. Each Glass Expansion spray chamber incorporates the Helix CT nebulizer interface with ConstantTorque technology, which provides a constant, reproducible, inert, gas-tight seal between the nebulizer and spray chamber each and every time. Glass Expansion offers the following spray chambers to accommodate all kinds of samples and applications.

Figure 2. Glass Expansion Spray Chambers

(a) Single-pass Tracey™

• Single-pass Tracey™ version for the highest sensitivity.
• For low volume applications we recommend the single pass Cinnabar™ spray chamber (20mL) option. The Cinnabar's design and low volume are ideal for the reduction of memory and matrix effects and very fast washout.

(b) Double-pass Twister™

• Double-pass Twister™ version with central baffle that rejects large droplets from the nebulizer aerosol for best short-term precision and lowest interferences.

(c) Inert Tracey TFE Spray chamber

• Made from totally inert PTFE - impervious to organic solvents and strong acids, even HF.

(d) IsoMist-XS- temperature programmable cyclonic spray chamber

• The IsoMist XS allows for direct analysis of volatile organic solvents such as naphtha without dilution at a temperature of -25°C, resulting in higher intensities, better precision, and higher accuracy when compared to studies at -10°C.

(c) HydraMist spray chamber

• The HydraMist can simultaneously determine As, Se, Sb, Tl and Hg using hydride generation and non-hydride forming elements using conventional pneumatic nebulization whilst offering more than a 10 fold improvements in detection limits for the cold vapor elements.

Ordering Information

Part Number	Description
20-808-8882HE	Tracey Spray Chamber with Helix CT
20-809-0222HE	Twister Spray Chamber with Helix CT
20-809-2506	Tracey TFE Spray chamber
KT-1135-XS	IsoMist XS
KT-1157	HydraMist Hydride Kit

---

Torches

We offer a wide range of torches and injectors to suit the ever-growing sample types in today's market. Whether you're after the simple to use, one-piece quartz torch for clean applications or the Fully Demountable Torch (FDT) for the more aggressive sample matrices, we have a wide range of options fit for every application.

Figure 3. Torches

(a) Fixed One-piece Quartz Torch

• Suitable for clean applications and laboratories with low sample volume workflows.

(b) Fully Demountable Torch

• Optional Ceramic Outer Tube
• Ideal for waste water, brines, fusions, and geological samples where quartz devitrifies rapidly due to the presence of high TDS
• Ideal for tribology (wear metals) and organic application where quartz prematurely fractures due to thermal shock
• Interchangeable injectors - choose the optimum injector for your application. Select from quartz for aqueous solutions, narrow bore for organics, wide bore for high dissolved solids.

Ordering Information

Part Number	Fixed One-piece Quartz Torch
30-807-0568	Quartz Torch with 2mm injector
Part Number	Fully Demountable Torch Options
31-808-8896	Torch body
31-808-8145	Quartz Inner Tube
31-808-0017	Alumina Inner Tube
31-808-8020	Quartz Outer Tube
31-808-0023	Syalon Outer Tube
31-807-0018	Polypropylene Ball Joint Adaptor
70-4X2.5V75	O-Ring for Glass Body (PKT 10)
70-EZG-CLOTH	EzyGlide Lubricated Cloth

---

Injectors

Part Number	Tapered Injectors
31-808-0009	Tapered Quartz Injector 1.0mm
31-808-0008	Tapered Quartz Injector 2.0mm
31-808-0027	Tapered Alumina Injector 2.0mm

---

Autosampler Probes

A wide range of inert autosampler probes are now available depending on your application. Sample lines available in various IDs (e.g. 0.3, 0.50, 0.75 & 1.0mm) for both the Guardian & Carbon Fibre probes.

Part Number	Description
70-803-1957	Guardian Probe for SPS3/SPS4/AIMS, 0.75mm Probe Connecting Line (Red)
70-803-1803	Guardian Probe Cetac ASX-200/500/800, 0.75mm Probe Connecting Line (Red)
70-803-0908	PTFE Sheathed Carbon Fibre Probe 0.75mm with 1/4-28 ratchet fitting
70-803-1443	PTFE Sheathed Carbon Fibre Probe 0.75mm with 1/4-28 ratchet fitting

View the full range of Guardian Autosampler Probes by visiting the Guardian Autosampler Probe landing page.

View the full range of Carbon Autosampler probes here.

---

Contour Flared-end Pump Tubing

It can often be quite difficult to insert the sample tube into the peristaltic pump tube. This is particularly so if the peristaltic pump tube has a small internal diameter (ID).To facilitate this connection, Glass Expansion supplies the Contour range of flared-end pump tubing. The flared end of this pump tubing allows the larger sample capillary tubing to be inserted.

Contour 2 Tag PVC, Flared End, 152mm between tags Overall Length:   455mm (152mm between tags) No. of tubes per pack:   6 Physical Properties:   Thermoplastic, PVC based material with plasticizer Special Properties:   Inexpensive all-round tubing for general laboratory applications
Part Number	Product	Tag colours	ID mm	Wall mm	OD mm
0.13-OBLK-F	Contour Flared End PVC Pump Tube 2tag 0.13mm ID Orange/Black (PKT 6)	orange/black	0.13	0.91	1.95
0.19-OR-F	Contour Flared End PVC Pump Tube 2tag 0.19mm ID Orange/Red (PKT 6)	orange/red	0.19	0.91	2.01
0.25-OB-F	Contour Flared End PVC Pump Tube 2tag 0.25mm ID Orange/Blue (PKT 6)	orange/blue	0.25	0.91	2.07
0.38-OG-F	Contour Flared End PVC Pump Tube 2tag 0.38mm ID Orange/Green (PKT 6)	orange/green	0.38	0.91	2.20
0.44-GY-F	Contour Flared End PVC Pump Tube 2tag 0.44mm ID Green/Yellow (PKT 6)	green/yellow	0.44	0.91	2.26
0.51-OY-F	Contour Flared End PVC Pump Tube 2tag 0.51mm ID Orange/Yellow (PKT 6)	orange/yellow	0.51	0.91	2.33
0.57-WY-F	Contour Flared End PVC Pump Tube 2tag 0.57mm ID White/Yellow (PKT 6)	white/yellow	0.57	0.91	2.39
0.64-OW-F	Contour Flared End PVC Pump Tube 2tag 0.64mm ID Orange/White (PKT 6)	orange/white	0.64	0.91	2.46
0.76-BLK-F	Contour Flared End PVC Pump Tube 2tag 0.76mm ID Black/Black (PKT 6)	black/black	0.76	0.86	2.48
0.89-ORG-F	Contour Flared End PVC Pump Tube 2tag 0.89mm ID Orange/Orange (PKT 6)	orange/orange	0.89	0.86	2.61
0.95-WBLK-F	Contour Flared End PVC Pump Tube 2tag 0.95mm ID White/Black (PKT 6)	white/black	0.95	0.86	2.61
1.02-WHT-F	Contour Flared End PVC Pump Tube 2tag 1.02mm ID White/White (PKT 6)	white/white	1.02	0.86	2.74
1.09-WR-F	Contour Flared End PVC Pump Tube 2tag 1.09mm ID White/Red (PKT 6)	white/red	1.09	0.86	2.81
1.14-RED-F	Contour Flared End PVC Pump Tube 2tag 1.14mm ID Red/Red (PKT 6)	red/red	1.14	0.86	2.86
1.22-RGRY-F	Contour Flared End PVC Pump Tube 2tag 1.22mm ID Red/Grey (PKT 6)	red/grey	1.22	0.86	2.94
1.30-GRY-F	Contour Flared End PVC Pump Tube 2tag 1.30mm ID Grey/Grey (PKT 6)	grey/grey	1.30	0.86	3.02
1.42-YLW-F	Contour Flared End PVC Pump Tube 2tag 1.42mm ID Yellow/Yellow (PKT 6)	yellow/yellow	1.42	0.86	3.14
1.52-YB-F	Contour Flared End PVC Pump Tube 2tag 1.52mm ID Yellow/Blue (PKT 6)	yellow/blue	1.52	0.86	3.24
1.65-BLU-F	Contour Flared End PVC Pump Tube 2tag 1.65mm ID Blue/Blue (PKT 6)	blue/blue	1.65	0.86	3.37
1.75-BG-F	Contour Flared End PVC Pump Tube 2tag 1.75mm ID Blue/Green (PKT 6)	blue/green	1.75	0.86	3.47
1.85-GRN-F	Contour Flared End PVC Pump Tube 2tag 1.85mm ID Green/Green (PKT 6)	green/green	1.85	0.86	3.57
2.06-PUR-F	Contour Flared End PVC Pump Tube 2tag 2.06mm ID Purple/Purple (PKT 6)	purple/purple	2.06	0.86	3.78
2.29-PBLK-F	Contour Flared End PVC Pump Tube 2tag 2.29mm ID Purple/Black (PKT 6)	purple/black	2.29	0.86	4.01
2.54-PO-F	Contour Flared End PVC Pump Tube 2tag 2.54mm ID Purple/Orange (PKT 6)	purple/orange	2.54	0.86	4.26
2.79-PW-F	Contour Flared End PVC Pump Tube 2tag 2.79mm ID Purple/White (PKT 6)	purple/white	2.79	0.86	4.51
3.17-BLKW-F	Contour Flared End PVC Pump Tube 2tag 3.17mm ID Black/White (PKT 6)	black/white	3.17	0.86	4.89

View the full range of products for the Analytik Jena® PlasmaQuant 9000 Series ICP-OES here.

Disclaimer: All listed product and company names are trademarks™ or registered ® trademarks of their respective owners.
Use of them does not imply any affiliation with or endorsement by them.